Blanket Chest (6-day)

Cherry with Curly Maple panel

6 day class

In this six-day workshop you will learn the art of hand cutting multiple dovetails on a large chest side. You will also learn how to make a frame and panel lid complete with a hand-planed raised panel and a mortise-and-tenon frame. The skills learned in making the lid alone are the same skills that you will need to make a fine cabinet door. The sides and top are cherry with an optional curly maple panel. The bottom will be solid cedar inside. The dimensions of the chest are 42″ wide, 19″ deep and 20″ tall. Although we will teach you how we prepared the wide panels, please note that we will pre-glue and pre-mill many of the parts prior to the class (in the interest of time). See below for the list of recommended tools for the class. In this class, we make this chest in cherry. If you would like to make it in walnut, it will be an additional $140.00.

To read more about the Blanket Chest course, click here on our Woodworking Blog.

This class is from 9 a.m. to 6 p.m.

We ask that you bring the following tools with you to this class:

Plow plane, with 3/8 cutter (Lee Valley tools sells one, or you can find a Record 044 combination plane used online. Patrick Leach at Super tools, sells a used Record 44 for about 150 dollars with all 8 cutters and the long rods.
http://www.supertool.com/oldtools.htm

http://www.leevalley.com/US/Wood/page.aspx?p=74089&cat=1,230,41182

Rabbet plane or a rabbet block plane, there are a few choices below.
https://www.lie-nielsen.com/product/block-planes/rabbet-block-plane-w-nicker?node=4072

https://www.lie-nielsen.com/product/no.-10-1-4-bench-rabbet-plane

Below is a list of tools that we recommend that you bring to this class.

 Low-angle jack plane, this plane is invaluable for all of your woodworking.
http://www.leevalley.com/US/wood/page.aspx?p=49708&cat=1,41182,41186,49708

https://www.lie-nielsen.com/product/bench-planes/low-angle-jack-plane?node=4065

Coping saw
http://www.leevalley.com/US/wood/page.aspx?p=32914&cat=1,42884,42902

http://www.highlandwoodworking.com/eclipsecopingsaw-4-58deep.aspx

Cutting Gauge
Either the Tite Mark below or a traditional cutting gauge will work
https://www.lie-nielsen.com/product/tite-mark-marking-gauges/tite-mark-marking-gauges-tite-mark-?node=4179

Block plane
Chisels (Set of 5)  1/4, 3/8, 1/2, 3/4, 1
Cutting gauge
Dovetail saw
Mallet
Marking gauge
Marking knife
Measuring tape
4 smoothing plane
Scraper, card and cabinet scraper
Starrett square
Tenon saw, rip and crosscut

NOTE: This class will close 1 week prior to the start date of the class.

For classes costing $1,000.00 or more, fifty percent of the registration fee is due when you register, and the remaining balance is due 30 days prior to your class date and will be charged to the same card you used to register for this class.

After you add the class to your shopping cart, you will automatically be charged the full amount of the class unless you put in the COUPON code of  WOODCLASS. (This code is case sensitive. Feel free to cut and paste it in the coupon code area if you’d like.)

Class size: 6

Note: Since our workshops are specifically designed for adults, an individual must be 18 years old to enroll in a class. All students should wear practical work clothes and shoes. For your safety, we ask that you do not wear shorts or sandals to a class you are attending.

Prerequisite(s):

Product Description

In this six-day workshop you will learn the art of hand cutting multiple dovetails on a large chest side. You will also learn how to make a frame and panel lid complete with a hand-planed raised panel and a mortise-and-tenon frame. The skills learned in making the lid alone are the same skills that you will need to make a fine cabinet door. The sides and top are cherry with an optional curly maple panel. The bottom will be solid cedar inside. The dimensions of the chest are 42″ wide, 19″ deep and 20″ tall. Although we will teach you how we prepared the wide panels, please note that we will pre-glue and pre-mill many of the parts prior to the class (in the interest of time). See below for the list of recommended tools for the class. In this class, we make this chest in cherry. If you would like to make it in walnut, it will be an additional $140.00.

To read more about the Blanket Chest course, click here on our Woodworking Blog.

This class is from 9 a.m. to 6 p.m.

We ask that you bring the following tools with you to this class:

Plow plane, with 3/8 cutter (Lee Valley tools sells one, or you can find a Record 044 combination plane used online. Patrick Leach at Super tools, sells a used Record 44 for about 150 dollars with all 8 cutters and the long rods.
http://www.supertool.com/oldtools.htm

http://www.leevalley.com/US/Wood/page.aspx?p=74089&cat=1,230,41182

Rabbet plane or a rabbet block plane, there are a few choices below.
https://www.lie-nielsen.com/product/block-planes/rabbet-block-plane-w-nicker?node=4072

https://www.lie-nielsen.com/product/no.-10-1-4-bench-rabbet-plane

Below is a list of tools that we recommend that you bring to this class.

 Low-angle jack plane, this plane is invaluable for all of your woodworking.
http://www.leevalley.com/US/wood/page.aspx?p=49708&cat=1,41182,41186,49708

https://www.lie-nielsen.com/product/bench-planes/low-angle-jack-plane?node=4065

Coping saw
http://www.leevalley.com/US/wood/page.aspx?p=32914&cat=1,42884,42902

http://www.highlandwoodworking.com/eclipsecopingsaw-4-58deep.aspx

Cutting Gauge
Either the Tite Mark below or a traditional cutting gauge will work
https://www.lie-nielsen.com/product/tite-mark-marking-gauges/tite-mark-marking-gauges-tite-mark-?node=4179

Block plane
Chisels (Set of 5)  1/4, 3/8, 1/2, 3/4, 1
Cutting gauge
Dovetail saw
Mallet
Marking gauge
Marking knife
Measuring tape
4 smoothing plane
Scraper, card and cabinet scraper
Starrett square
Tenon saw, rip and crosscut

NOTE: This class will close 1 week prior to the start date of the class.

For classes costing $1,000.00 or more, fifty percent of the registration fee is due when you register, and the remaining balance is due 30 days prior to your class date and will be charged to the same card you used to register for this class.

After you add the class to your shopping cart, you will automatically be charged the full amount of the class unless you put in the COUPON code of  WOODCLASS. (This code is case sensitive. Feel free to cut and paste it in the coupon code area if you’d like.)

Class size: 6

Unless otherwise noted, the materials fee for our classes is included in the registration cost.
2018
February
26
Mon
Feb. 26th - Mar. 3rd
Total Registration Cost: $1440
Status: Open
Clear selection

Student Info

(if different than you)

Foundational Prerequisite Date

What year did you take our six-day foundational joinery class?

Walnut Blanket Chest

Walnut Wood

Blanket Chest Kits

To purchase a kit (to make at home) click the box below


Additional Information

Class Date

2018-02-26, 2017-04-17