Roubo Workbench (10-day)

jonathan

10 day class

This is a ten-day class. The first week runs from Monday through Saturday and the second week runs Monday through Thursday. (No class on Sunday).

Each student will build their own hard maple Split Top Roubo workbench, using the Benchcrafted M series leg-vise and tail-vise (includes the criss-cross). The overall size of the bench is 36″ tall, 26″ wide, and 7 feet long. (If someone wants to change the height or length due to special needs we could work with that.)

In this class you will glue up the pre-milled wood for the top, layout and cut the mortise and tenons for the base, layout and cut the dog runs, hand-cut the dovetail for the end-cap, make the sliding support, gap-stop, dogs and install the vises, just to name a few things that will be done in the class.

The Roubo workbench is considered the most utilitarian style workbench for fine furniture makers, having a leg-vise with about 11″ of depth before hitting the vise screw and a large hand-wheel that makes opening and closing the vise a joy to use. A tail-vise with a hand wheel, sliding support or deadman helps hold longer boards when jointing the edges, and the gap stop acts as a planing stop and a tool holder. Plus the 4″ thick hard maple top gives the bench enough weight to keep it from “walking” across the floor when used.

Optional: If you want the walnut accents for the end-cap, leg-vise chop, sliding support and gap stop it will be an additional $110.00.

Please bring the following tools with you to this class:
24” pipe clamps (at least 8, but more if possible)
A low-angle block plane or jackplane
A jointer plane or the longest plane you have

This class is from 9 a.m. to 6 p.m.

NOTE: This class will close 1 week prior to the start date of the class.

For classes costing $1,000.00 or more, fifty percent of the registration fee is due when you register, and the remaining balance is due 30 days prior to your class date and will be charged to the same card you used to register for this class. After you add the class to your shopping cart, you will automatically be charged the full amount of the class unless you put in the COUPON code of  WOODCLASS. (This code is case sensitive. Feel free to cut and paste it in the coupon code area if you’d like.)

Class size: 6

Note: Since our workshops are specifically designed for adults, an individual must be 18 years old to enroll in a class. All students should wear practical work clothes and shoes. For your safety, we ask that you do not wear shorts or sandals to a class you are attending.

Prerequisite(s):

Product Description

This is a ten-day class. The first week runs from Monday through Saturday and the second week runs Monday through Thursday. (No class on Sunday).

Each student will build their own hard maple Split Top Roubo workbench, using the Benchcrafted M series leg-vise and tail-vise (includes the criss-cross). The overall size of the bench is 36″ tall, 26″ wide, and 7 feet long. (If someone wants to change the height or length due to special needs we could work with that.)

In this class you will glue up the pre-milled wood for the top, layout and cut the mortise and tenons for the base, layout and cut the dog runs, hand-cut the dovetail for the end-cap, make the sliding support, gap-stop, dogs and install the vises, just to name a few things that will be done in the class.

The Roubo workbench is considered the most utilitarian style workbench for fine furniture makers, having a leg-vise with about 11″ of depth before hitting the vise screw and a large hand-wheel that makes opening and closing the vise a joy to use. A tail-vise with a hand wheel, sliding support or deadman helps hold longer boards when jointing the edges, and the gap stop acts as a planing stop and a tool holder. Plus the 4″ thick hard maple top gives the bench enough weight to keep it from “walking” across the floor when used.

Optional: If you want the walnut accents for the end-cap, leg-vise chop, sliding support and gap stop it will be an additional $110.00.

Please bring the following tools with you to this class:
24” pipe clamps (at least 8, but more if possible)
A low-angle block plane or jackplane
A jointer plane or the longest plane you have

This class is from 9 a.m. to 6 p.m.

NOTE: This class will close 1 week prior to the start date of the class.

For classes costing $1,000.00 or more, fifty percent of the registration fee is due when you register, and the remaining balance is due 30 days prior to your class date and will be charged to the same card you used to register for this class. After you add the class to your shopping cart, you will automatically be charged the full amount of the class unless you put in the COUPON code of  WOODCLASS. (This code is case sensitive. Feel free to cut and paste it in the coupon code area if you’d like.)

Class size: 6

Unless otherwise noted, the materials fee for our classes is included in the registration cost.
2017
October
16
Mon
Oct. 16th - Oct. 26th
Status: Closed
Class full
Clear selection

Student Info

(if different than you)

Foundational Prerequisite Date

What year did you take the six-day foundational course?

Accents for workbench

Walnut Wood Accents for Workbench


Additional Information

Class Date

2017-10-16