Tools to Setup Your Home Blacksmith Shop

This article was also featured in the Winter 2012 issue of the SustainLife journal.
Blacksmithing

Making nails

Setting up a home blacksmith shop is not that difficult. You can get everything you need for about $300-500 if you buy used equipment and make what you can yourself. The main tools you’ll need to get started are a forge, an anvil, a vice,  hammers, and tongs. One of the great things about blacksmithing is that you can make many of the tools yourself, as you go.

Forge

The forge is what you’ll use to heat the metal that you’re working. It consists of a firepot, to hold the fire, a work surface, and a blower. The firepot should be about 4-5 inches deep, and can be made from an old brake drum. The forge I use is made of brick and firebrick and is more substantial, but I’ve also seen forges on old farms made from concrete poured into a tractor tire, with a depression for the firepot. You can find blowers in antique stores or salvage them from air conditioning units, clothes dryers, or other used appliances. My dad’s first forge was basically a brake drum with legs. The blower was an old hair dryer!

Blacksmith's forge

Small forge and blower

Anvil

Unless you have a lot of money to spend, it’s best to start with a used anvil. You can find them for about $1-2 per pound. Even if an anvil has some dings, it can be cleaned up and resurfaced if necessary, and it will work just fine. A “wanted” ad in the paper is a good way to find these and other blacksmithing equipment. We’ve also found anvils and other blacksmithing equipment at farm sales, estate sales, and farm auctions.

Anvil

Anvil and other tools

Hammers

You can start with a basic ball pein or a cross pein hammer. You can usually find these at local hardware stores. You can also order various types of blacksmith hammers from a blacksmith supply house. Once you develop some skill with blacksmithing, you’ll be able to make hammers.

Blacksmith's hammers

Ball pein and cross pein hammers

Vice

There are two main types of vices, the post vice and the machinist’s vice. A post vice is the blacksmith’s vice. It is designed to stand up to the hammering. Machinist vices, particularly the smaller ones, can be damaged from the repeated hammer blows. The place to look for post vices is farm auctions and estate sales. If you’re not able to get a post vice, you can start with a machinist’s vice. It’s best to get a larger vice that will stand up to the hammering well, and you’ll need to fit it with smooth jaws so that it won’t mar the workpieces.

Post vice

Post vice

Tongs

Over time, you’ll need many different tongs, one or two for each thickness of metal that you work with. Having tongs that are the right size for your materials makes it much easier to keep a good grip on your metal and improves the quality of your work. But for starters, you only need about 1-2 pairs, which you can buy for $30-40 each from a blacksmith supplier. After you’ve gained some experience blacksmithing, you’ll be able to make your own tongs. Usually by the end of our two day blacksmithing class, our students are ready to begin learning the skills of tong making.

Blacksmith's tongs

Three types of tongs

Other Tools

You’ll also use drifts, slitters, center punches, twisting tools, and chisels. These are all tools that you will be able to make yourself as you develop your skills.

Blacksmith's Tools

Tools made by the blacksmith: hardie cutoff, cold chisel, center punch, and set hotcut

 

Visit SustainLife journal for more information about the journal.

To learn more, see our online blacksmithing videos and our series of classes on blacksmithing and other traditional skills.